Systems are available with different models and customized for manual backwash without using electricity or it can be made fully-automatic. System can be used in a variety of applications including residential, commercial and any process water applications for food and beverage industry. Standard systems are designed with a filtration velocity of 20 m/h (8.2 gpm/ft2) to provide a good filtration. This value may differ for advanced application like Arsenic, Radium, Uranium and other Heavy Metal removal where co-precipitation process requires higher contact time thus lower filtration velocity. Running the system at higher velocity may compromise the filtration performance.Virtually there is no flow rate limitations for KL systems as KL units can be configured in parallel to address industrial high flow requirements. Recommended System Operating Conditions: Inlet water pH 5.8 - 10.5. Recommended Maximum Flow Rate 9.6 GPM. 1 - FRP Tank 1252 (includes distributor tube with upper and lower baskets).
1 - Fleck 2510 SXT Backwash Valve AIO Oxygen Chamber System DIgital Control Valve. 1 - 2 Cu Ft Katalox Light®. 1 - ByPass Valve - 1.Oxygen Chamber System technology uses natural oxidation to remove Iron, Manganese and Hydrogen Sulfide from the water supply, without chemicals, without aerators, without air compressors, without venturis or loss of pressure. A Patented air injection technology built into the control valve and a Check valve that keeps a pocket of pressurized air in the tank increase the capacity of the media to remove high levels of Iron, Manganese and Hydrogen Sulfide.
When passing through the pocket, the high levels of iron and manganese get oxidized and are trapped to the bed. Is converted to sulfur and precipitates as elemental sulfur.The bed is then backwashed rinsing them down the drain. Fleck's new SXT controller is the next generation control valve. This replaces the past SE platform. The SXT features the same. Basic functionality as the SE, but has a larger backlit display, new diagnostic view, improved programming and a power backup. Injector/drain modules contain the brine valve, flow controls and injector are removable from the valve's exterior. The time is built with rugged 3/8 wide gears. The controls are user fridenly and easy to program. The valve body is constructed of non-corrosive, UV resistant, fiber reinforced plolymer.
Large LCD with 48 hour capacitor backup, for power outages. Note: Selecting a water treatment system begins with water test results from a certified drinking water testing lab. Such test results should be compared to the water treatment product specifications to ensure that the treatment system being considered is designed to treat. The substances you want to treat. In the concentrations at which they exist in your water.
There is no one-size-fits-all water treatment technology that addresses all water quality problems. In some cases, one treatment technology may meet all your specific needs. In other cases, you may need a treatment traina series of treatment technologies in a sequence that treat one or more water quality problems. Again, when considering water treatment, use your lab test results as a guide and make sure the technology you are considering is designed to treat the problematic substances in your water.
This item ships only within US 48 Mainland, NO APO Addresses. Titan Water Pro is your "Clean Water Solutions". The item "Katalox Well Water Filter System with Fleck 2510SXT AIO Oxygen Chamber System" is in sale since Thursday, February 8, 2018. This item is in the category "Home & Garden\Home Improvement\Plumbing & Fixtures\Water Filters & Filtration Parts". The seller is "titanwaterpro" and is located in Lancaster, California.This item can be shipped to United States.