260- 300gpd Hydronponics Reverse Osmosis Ro Water Filtration System Food Process

For Hydroponics, fresh water aquarium, food processing, spot-free washing, light-commercial applications. 260 GPD or 10 gallons per hour. 10 to 30 ppm pure water, 95-98% rejection after our high quality membrane. Two x 150GPD membrane in series. 20" sediment and carbon filters, double the size of regular 10" cartridges. Pure water to drain ratio is 1: 2. High capacity and high rejection RO system is now available. Watergeneral Reverse Osmosis Water System Made in USA.

6-stage 260 gal/day Reverse Osmosis Water System + Bonus Pressure Gauge. Note: 260 to 280 gallons per day capacity is the maximum production rate of the system, actual production rate depends on input pressure and temperature. For example, at 70psi and 60 degrees the system makes 250 gallons per day or about 10 gallons per hour. Lower input pressure and temperature would decrease production rate. Tap or well water ---->.

Water purity about 300 ppm. This system is a complete system ready to be installed. RO unit with All 5 stage , 5 filters (ALL FILTERS ARE STANDARD SIZES).

Feed water adapter valve which connects to cold water supply under the sink. When your shut off the dispensing valve or when your own float valve closes, the automatic shut-off valve shuts off the water feed and drain, so prevent wastage of water going to drain.

And if you have your own large container and float control valve, this system would turn ON/OFF automatically to refill your container. This system is a RO system.

It connects to the water supply, then it produces purified water. You need to have your own container to collect the water since the system doesn't come with a tank. Is the preferred partner of Honeywell Inc. We have very knowledgeable tech support & Customer service team at if you have questions about this listing. We offer high capacity filters, you only need to replace the pre-filters and post filter once a year instead of every 6 months.

Easy installation: if you can replace a kitchen faucet, then you can install this system. We guarantee the performance of the RO systems. We carry all parts and components.

This is a complete system with all filters, tubing, feed water adapter, drain saddle valve, installation manual. 1st stage: high capacity, 5 micron sediment filter, to remove sediment, rust, sand, (replace every 12 months). 2nd stage: high capacity carbon filter , coconut shell carbon block filter removes chlorine, taste & odor (replace every 12 months). 3rd stage: high capacity carbon filter, coconut shell carbon block filter further removing chlorine to ensure 100% removal of chlorine (replace every 12 months).

4th stage: US Membrane TFC-150 high rejection membrane : 100% Made in USA, Specially made for high purity applications. Through our own testing using 417ppm and 70psi input tap water, this membrane has better rejection rate than Dow chemical Filmtec 75GPD and GE membranes. 5 th stage: US Membrane TFC-150 high rejection membrane : 100% Made in USA, Specially made for high purity applications. No harmful chemical added: Our resin does not contain chemical that will be harmful to skin, to fish, to reef, to live rock.

It will not put any additional chemical into the purified water. FREE bonus Pressure Gauge: It's helpful in monitoring. Operating pressure of the RO system. When to replace sediment & carbon filters. DI Filter Dispensing Ball Valve is included: We specially include additional ball valve for the DI filter.

The output is going to your own container or fish tank. When you shut-off this valve at the output, the automatic shut off valve with turn off the system in about 1 to 2 minutes.

You don't need to shut off at the water supply. Just shut off the output valve, system would shut off. Automatic-Shut-Off Valve is included; when you shut off the dispensing valve or when your own float valve closes, the automatic shut-off valve shuts off the water feed and drain, preventing wastage of water going to drain.

Feed Water Adapter: for under the sink installation, we give you the adapter with valve to put in between the cold water line. Our adapter has several advantages over the self-piercing valve.

Our adapter will not clog up like the needle point piercing valve. Also our adapter does not require putting a hole in the pipe. Also you can easily replace the valve or relocate the valve without changing your piping, unlike the other self-piercing valve, where once it punctures a hole you cannot replace the valve, then you need to replace the pipe and the valve. Garden Hose adapter, connects to garden hose or laundry room hose, part no. 20 long bottom 4 filter housings. Double the capacity of regular 10 filters. Heavy duty double-O ring designed for stronger seal. High quality filter housing NSF approved housing for drinking water. We use a fixed rate flow restrictor to accurately restrict the drain line and create proper working pressure for the operation of the reverse osmosis process. Therefore, a more efficient and favorable pure water to drain ratio is achieved at 1:2. We have abandoned the type of flow restrictor that has a black lever on top for flushing since it is not an accurate flow restrictor. The system flushes itself when it is making water. In most cases a manual flush valve is not required.

However, it is beneficial to manually flush the membrane if the water supply is from well or very hard water, above 600 ppm of TDS or Hardness. Optional Kitchen Faucet Diverter Valve, connects to the aerator of the faucet for easy installation and removable connection to water supply on the counter top , part no. You can use large pressure tank to store purified water. The large tank stores about 10 gallons of pure water.

The small tank stores about 3 gallons. Stainless steel arm and connector, plastic float. It is very reliable and durable, never breaks. You can choose side-mount, part no.

FV-14 or top-mount part no. FRONT VIEW OF THE UNIT (Two-membrane in series). All reverse osmosis systems, residential or commercial, are required to have drain water when making pure water. Our RO systems have built-in auto-shut-off valve so when the storage tank is full, the system shuts off automatically. The ratio of pure water to drain water for our RO systems are 1:2 (calculated).

Average RO systems are typically 1:4, so our RO systems run more efficiently. Minimum water pressure required to operate the system is 45 PSI. Ideal pressure is 85 PSI. This system is intended to be operated with under 400 ppm tap water. If you have higher ppm in the water, the purified result will be affected and we can not guarantee the purification ratio.

The item "260- 300GPD HYDRONPONICS REVERSE OSMOSIS RO WATER FILTRATION SYSTEM FOOD PROCESS" is in sale since Tuesday, March 29, 2016. This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Hydroponics & Seed Starting\Other Hydroponics".

The seller is "filterdirect" and is located in Santa Ana, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Saint kitts and nevis, Saint lucia, Barbados, Bolivia, Gibraltar, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Maldives, Oman, Peru, Pakistan, Paraguay, Viet nam, Uruguay.

MPN: RO-260
Brand: Watergeneral