4-stage Portable Countertop RO Reverse Osmosis Aquarium System with DI, 75 GPD

  

4-stage Portable Reverse Osmosis System for any type of Aquariums with DI Filter (0PPM). OVERVIEW: The Reverse Osmosis Revolution system easily attaches to your kitchen faucet without the need for plumber. 1st stage: Premium Quick-Connect 5 micron sediment filter.

Dust and rust particles are trapped here in a filter which also extends the life of the system and the membrane. 2nd stage: Premium Quick-Connect T28 coconut activated carbon filter - VOCs (volatile organic compounds) and other common chemicals are removed from the water in this stage. This filter also removes chlorine, cloudiness, offensive odors, colors and unpleasant tastes.

3rd stage: High Rejection TFC type reverse osmosis membrane. 95%-99% of total dissolved solids (TDS) and other elements are removed in this stage. Arsenic, fluoride, lead, chromium, radium, viruses, bacteria, and other unhealthy contaminants are removed from the water. 75 gallon per day capacity.

Ideal filter for aquarium owners. Aquarium RO Water Purification System delivers approximately 3 gallons of pure, clean water per hour. There are 2 major problems with municipal water for aquariums. Chlorine, chloramine (and other chloration byproducts). Using tap water, which has been treated with chlorine for human use, can be deadly to fish.

Our Aquarium Reverse Osmosis System removes more 96%-99.8% of chlorine/chloramine byproducts. We use modern GAC T28 Carbon Prefilter and RO Membrane to remove chlorine from the water. The nitrogen cycle is responsible for your aquarium's biological filtration and the removal of toxins. Within this cycle, bacteria and fungi break down uneaten food, dead organisms, fish, plant, and invertebrate waste into ammonia.

Aerobic bacteria break down ammonia into nitrite, and nitrite into nitrate. Nitrate causes stress to fish and invertebrates, which opens the door to diseases and reproductive failures.

In addition, high nitrate levels can quickly change water chemistry. So nitrate removal is vital to your aquarium's overall health. For most aquarists, nitrate is then removed from the system by frequent water changes. But your municipal water is not a good source of. Fresh water for aquarium since it may have nitrate/nitrite. US EPA allows up to 10ppm of nitrite/nitrate in water. Some municipal water has high level of nitrate, nitrite containments. Regular Reverse Osomosis membrane (any brands) removes only 60-76% nitrates. Beds filter can increase removal up to 85-95%. Beside nitrate & nitrite removal, DI Beds filter provide extra protection against many other water containments. This RO System is one of the best systems on market for aquarium use. Reverse osmosis with DI removes virtually everything from tap water, including essential minerals your aquarium inhabitants need to flourish. Depending on the type of aquarium the RO water is being used for, it may be necessary to add these essential minerals back into the purified water.

Most marine salt mixes already contain these minerals and the use of RO conditioners is not necessary. However, freshwater aquariums require re-mineralization to achieve the desired pH. There are 2 options to use Aquarium RO. Mixing RO Water with Tap Water The simplest way to use RO water for softening water and lowering pH is to mix a proportion of tap water and RO together to achieve the desired levels. You can mix ¾ RO water with ¼ tap water to produce the desired result.

Using 100% RO Water and Remineralising Starting with pure RO water, essential salts and minerals are added in proportions that create water with the correct parameters for the fish it is to be used for. This needs to be done carefully and although minerals and compounds can be custom mixed by the individual fishkeeper, the simplest and most accurate way to reconstitute RO water is by using commercially available products. There are many remineralisation products available, some of which are specifically designed for certain types of fish. When you first switch to using RO to adjust hardness and/or pH in an established tank you MUST do this gradually over a number of partial water changes.

TYPICAL REJECTION CHARACTERISTICS OF R. Elements and the Percent Membranes will remove. According to the EPA, tests with thin-film composites removed the following contaminants from drinking water. 80% to 100% percent of triazine. 98.5% to 100% of acetanilide.

98.5% to 100% of organophosphorus pesticides. 92.9% or more of carbamate pesticides. Chlorine, chloromine, aluminum, cyanide, methane, radon, silver, copper, chromium strontium, uranium, benzene, nitrates, cysts, pesticides, radium, sediments, VOCs (volatile organic compounds), unpleasant tastes and odors are most effectively removed from water with membrane and carbon filters.

RO can remove between 85% to 95% of fluoride. You can read installation instruction here. Filter replacement : We recommend to change filters every 8 months for family of 3-4 members, and 1 year for family of 1-2 members.

4-stage Reverse Osmosis System - kitchen adapter - collet release tool Water supply options. Any kitchen faucet comes with aerator. Just unscrew aerotar to check what kind of spout do you have.

Other options to hook RO Water Purification System. If you don't need spout (faucet) adapter - we can replace it with garden, 1/2x1/2x1/4 or needle valve adapters for free. Remove sand, silt, dirt and rust particles. Remove chlorine, chloromine, aluminum, cyanide, nitrates, cysts, pesticides, VOC. Also improve test and water color & odor reduction.

1.500 Gal or 6-8 months. T28, Standard Coconut Shell GAC.

Decrease level TDS to 0-2 PPM. Last or before T33 post filter. Mixed bed DI (Deionizing) resin.