Boost Pump, Water Pressure Gauge. TDS LEVEL CAN REACH TO 0 ppm. SimPure T1-400UV 5-stage water filtration system converts your tap water or well water(TDS=500 ppm) into pure and healthy drinking water by removing 99.99% of the 1,000+ contaminants. Of pure water, when the.
The TDS~0 ppm of Pure water, when the TDS of feed water is between 200 ppm and 500 ppm. Use no chemicals and emits absolutely no by-products, effectively destroying 99.99% of microorganisms, bacteria, germs more thorough sterilization from your water.
SimPure UV purification system combined with 4-Stages RO Filtration System, can take water purification to another level. 400 GPD CAPACITY & 1.5:1 PURE TO DRAIN RATIO. Advanced 400GPD membrane saves 60% of water, with LOW WASTE 1.5:1 pure to drain water ratio. Great for household and light commercial in Restaurants, Salons, Labs, and Offices all benefit in their ways from high-quality RO water. No worries for low water pressure.
Built in booster pump increases the production of purified water by raising the water pressure and maximizes RO production rate to the optimal level for the reverse osmosis process. Come with lead-free SU304 Stainless Steel drinking water faucet with 360° free swivele.SimPure T1-400UV is a new generation RO water filtration system under sink. It adopts tankless design, which can save up 70% of your under sink/under counter space. It will be much easier and more convenient to install, ready to use within 30 minutes. Also you can get rid of the water tank, avoid the secondary pollution. It supplies you 24/7 fast and stable flow purified water, never need to wait. The pressure gauge can remind you when to replace the filters, which is more scientific than timing. If the water flow is much slower than before, please refer to the pressure gauge to replace filter, when the data>100psi, if the waste valve is not clogged, please replace RO membrane filter. When the data is much lower than feed water pressure, please replace PP filter, then replace CTO filter. TEST AND CERTIFIED BY SGS. The SimPure reverse osmosis system is certified against GB/T 5750 Standard.
Converts your tap water/well water(TDS=500 ppm) into pure and healthy drinking water by removing 99.99% of the 1,000+ contaminants including viruses, bacteria, chemicals (PFOA/PFOS, Pharmaceuticals), heavy metals (Lead, Arsenicetc), chlorine, TDS (fluoride, nitrates/nitrites) and etc. Seattle, WA USA, SimPure dedicated in providing world-class quality of water filtration solutions. Please contact our trained water specialists. And is available to answer any questions during the life of the product.
1x SimPure T1-400UV Main Body. 3x Tubing 1/4 PE (White+Blue+Red, 59 inches). 1x Gooseneck SU304 stainless steel faucet.1x Faucet adaptor 1/4 tube QC. X1/2 female NPT convertor fitting. 1x 1/2" male NPT x3/8" female comp. 5x Self-tap screws M5X36mm & wall plugs.
Maximum Flow Rate : 400 GPD (400 Gallons Per Day). Power Requirements : 110 Volts, 60Hz, AC. Feed Water Type : Municipal Potable/Tap water or Well water meeting government drinking water standards. Feed Water Pressure : 15 - 60 PSI. Note: Install a prssure regulator if exceeding this feed water pressure.Feedwater TD S level : = 500 ppm. UV Light : UV wavelength range: 270280nm; UV dose: 8600uJ/cm². UV Sterilization rat e : =99.99%. Filter Service Life : 3-6 Months (PP Filter), 3-6 Months (CTO Filter), 3-6 Months (T33 Filter), 6-12 Months (RO Filter). Dimensions : 15.9" x 15.6" x 5.2.
Wa rr an t y : 1 Year. 5-Stage RO+UV Water Filtration System. Premium 4 large filters remove up to 99.99% of contaminants, like, Odor, Lead, Fluoride, Nitrates, heavy metals, and 1000+ contaminants. And equipped with a UV sterilizer, effectively reduce up to 99.999% of harmful microorganisms in your water. Supplying you great-tasting and healthy water.
400 GPD & 1.5:1 Pure to Drain Radio. Advanced 400GPD membrane offering an exceptional 1.5:1 pure to drain ratio. With a fast and stable water flow rate, this RO system fills a 200ml cup with water in 10 seconds. The pre-equipped high powered booster pump increases the production of purified water by raising the water pressure and maximizes RO production rate to the optimal level for the reverse osmosis process. T1-400 UV RO System produces pure water on demand, eliminating the need for a water storage tank.
The FIRST GLASS water TDS level=0 ppm(if feed water TDS level=200 ppm). No need to flow water 30 seconds for first glass water. T1-400 UV tankless reverse osmosis drinking water system is equipped with a pre-membrane pressure monitoring function, which reminds you to replace the filter more intelligently and scientifically.
Serving USA since 2006 - Located Seattle, WA USA, SimPure is dedicated to providing world-class quality water filtration solutions. Easy and convenient to get after-sales support. If you have any question, please contact our trained water specialists. Q: The system cannot be powered on after you insert the power plug. A: Check the power under the sink, as this occurs primarily when the power under the sink is powered off.
Also check the connection betwen the power plug and the power outlet to ensure that the system has been correctly plugged into the power outlet. Q: No output water from the faucet. A1: Water supply is off:Turn on the feed water adapter or water supply valve. A2: Incorrect filter installation:Reinstall the filter and make sure each filter cartridge is installed in the correct location. A3: A tubing is crimped:Check all the tubing and remove any crimps.Q: Low water flow at the faucet. A1: A tubing is crimped or there is a leak from the tubing connection:Check to ensure that all tubing is installed correctly and completely. A2: Low water temperature:Be sure to use it at a temperature of 40-100? A3: Low water pressure:Confirm the water pressure is between 15-60 psi. A4: The filter cartridge has been clogged: If you are using well water as the source, please ensure that the feed water has been through a pre-filtration system.
Otherwise, large particles in the well water will easily clog the filter and shorten the filter life. Q: Why does black water come out during flushing? A: It's normal that black water comes out when flushing.The purpose is to remove carbon powder remaining on the surface of filter materials. You can normally use it after flushing for 5 minutes. Q: Filtered water from the faucet tastes like tap water. A1: Incorrect tubing installation:Make sure the drain tubing is not connected to the faucet.
A2: The filter is expired: Replace the T33 filter or RO filter cartridge. Q: What should I do if the system is leaking. A: Check all the joints, filttings, and tubing connections to locate the leakage.
Make sure the cartridges are well installed. Turn off shut off valve, then solve it.
This item is in the category "Home & Garden\Kitchen, Dining & Bar\Small Kitchen Appliances\Water Purification\Water Filters". The seller is "domesticwaterfilterexpert" and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Sweden, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Switzerland, Norway, Croatia, Republic of, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bolivia, Ecuador, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Cayman Islands, Liechtenstein, Luxembourg, Monaco, Martinique, Nicaragua, Peru, Paraguay, Uruguay.