Reverse Osmosis System

Aquatec CDP-8800 RO Booster Pump-CDP 8852-2JO3-B423 (Pump/Transformer Options)


Aquatec CDP-8800 RO Booster Pump-CDP 8852-2JO3-B423 (Pump/Transformer Options)

Aquatec CDP-8800 RO Booster Pump-CDP 8852-2JO3-B423 (Pump/Transformer Options)   Aquatec CDP-8800 RO Booster Pump-CDP 8852-2JO3-B423 (Pump/Transformer Options)
No knockoffs disguised as genuine Aquatec, no used pumps, and no pumps recovered as fire sale items of another vendors business. The single greatest investment in your RO system, to improve overall performance, is a booster pump. Low water pressure negatively affects RO system performance. Addition of a booster pump increases system performance. Increase water production rate by up to 200%. Decrease TDS of RO water by as much as 75% (a measure of water purity). Decrease brine: permeate ratio by as much as 200% (a measure of waste discharged to drain compared to RO water produced). Reduce tank fill time by as much as 50%. Increase water pressure and flow at the RO faucet by as much as 200%. Increase RO membrane life by as much as 2-3x.

Three chamber diaphragm pump, self priming, and capable of being run dry. Excellent pump for boosting supply water pressure to RO systems 100- 200 GPD.

The pump is a must for homes with low supply water pressure. The pump delivers 1.4LPM (532 GPD) at 80 psi and 2.6 LPM (989 GPD) in the fully open position. The pump comes standard with 3/8 John Guest push to connect inlet/outlet fittings.

Operates on 24VAC, requiring an optional110v/60 Hz transformer and pressure switch for pump operation. Included with the pump are two 1/4" push to connect x 3/8" stem reducing elbows for use with 1/4 tubing.

Pump output can easily be adjusted to optimize inlet pressure to the RO membrane by turning a 1/16 Allen screw on the top of the pump head. MOTOR:TYPE: 24 VAC, Permanent Magnet, Totally Enclosed, Non-VentilatedLEADS: 20 AWG, 6 LONG. LIMITS: This Motor is Not Equipped with ThermalProtection. For User Safety, OptimalPerformance, and Maximum Motor Life, TheMotor Surface Temperature Should Not Exceed150°F (66°C), as Shown on the Heat Rise Graph.

PUMP DESIGN: 3 Chamber Diaphragm Pump, Self Priming, Capable of Being Run Dry. BASEPLATE: Nylon with 4 mounting holes and rubber vibration dampeners. TYPICAL APPLICATION: Pre-Filter Water Treatment R.

LIQUID TEMPERATURE:170°F (77°C) Max. Note: For 36-75 GPD RO systems, select CDP 6800 booster pump.


Aquatec CDP-8800 RO Booster Pump-CDP 8852-2JO3-B423 (Pump/Transformer Options)   Aquatec CDP-8800 RO Booster Pump-CDP 8852-2JO3-B423 (Pump/Transformer Options)