Premium long lasting Polypropylene, Block Activated Carbon filters provide grate pre-treatment of tap water before it reached RO membrane. High quality post-carbon filter make water fresh and crispy clean before it reach faucet. COMACT INNOVATED DESIGN- slim with dimensions only 18x16x4 inches this system takes very small space out of your kitchen cabinet space; filter cartridge replacement reminder will let you to understand when you need to change filter cartridge; with easy change bayonet filters it tacked only 2 seconds to change each cartridge; Integrated water flow with no tubes and fittings provide no leakage risk when you using this machine.
Auto flush is to help prevent scaling or fouling of the RO membrane. EASY TO INSTALL AND OPERATE - colored quick connect fittings on the back of the system allowed quick, easy and reliable (without any water leaking) connection of this unit to water source 3/8" white tubing, drain 1/4" red tubing and drinking water faucet 1/4 blue tubing.Low pressure switch send automatic signal to the booster pump to increase water presser to the level needed to maximum performance of membrane. Auto flush valve periodically clean system.
This reverse osmosis system use 400 GPD NSF certified membrane to deliver the highest quality clean, filtered drinking water; high quality easy change bayonet filters cartridges (polypropylene filter, block carbon filters) to maximized membrane performers; low, high pressure switches and booster pump to inshore steady water supply; auto flush valve to automatically clean up system and easy change bayonet inline carbon filter known as polishing filter. This complete 4-stage water filter system is made from high quality components to offer exceptional contaminant rejection rates and long-lasting, reliable performance. RA-PAD2 is an affordable workhorse to remove up to 99% of all contaminants, such as chlorine, taste, odor, toxic fluoride, arsenic, lead, and chromium. This efficient and productive or system will provide your family with trouble-free, high quality drinking water for many years to come.
How to replace bayonet filters. Open Faucet & drain any remaining water from System. Open Top Cover of the System. To remove filters turn and pull them up.Replace filters, push down and turn them, close top cover of System and open valves. Perform pre-filter flush after filters have been changed. Bayonet NSF serified membrane removes up to 99% of all contaminants, such as chlorine, taste, odor, toxic fluoride, arsenic, lead, and chromium. Bayonet T-33 post carbon, to stabilize the water tasting qualities and further remove any traces of bad tastes and odors. Bayonet PP sediment, removes sand, dirt, silt, rust, and other fine particles.
Bayonet block carbon is effective in removing chemicals like iron, manganese, chlorine, and hydrogen sulfide from your water to name a few.